Monitor Test - NAMCO TIME CRISIS 2 Operation Manual

7. OPERATING THlS MACHINE
The MONITOR TEST performs various adjustments on the monitor.
(See P-55, 8-3-l (3) "Adjusting the monitor.")
While on the MENU screen, select MONITOR TEST and press the enter switch. The ,MON&
TOR TEST screen will then appear.
q
With the select switch, choose an option. The selected option will blink.
Press the enter switch to display the corresponding pattern. To get out of the pattern screen,
press the enter switch again.
(a) Displays a gradation pattern.
(b) Displays a crosshatch pattern for CRT monitor. (This is not used for projectors.)
(c) Displays a crosshatch pattern for projectors. (This not used for CRT monitors.)
(d) Displays the white window (H, or high).
(e) Displays the white window.(M, or medium).
Displays the white window (L. or low).
(g) Displays an interlace pattern.
(h) Displays an adjustment screen for CRT monitors. (This is not used for projectors.)
(i) Displays an adjustment screen for projectors. (This is not used for CRT monitors.)
Displays white all over the screen.
q
Select EXIT and press the enter switch to go back to the MENU screen.
MONITOR
P A T T E R N
CROSSHATCH
PATTERN
WINDOW CR)
W-SITE
WINDOW
INTERLACE PATTERN
WRITE
STLECT SW:CHOOSE ENTER
MONITOR TEST screen
38
TEST
(CRT)
- -
(PROJECTOR)