Installation; Conditions For Installation - NAMCO TIME CRISIS 2 Operation Manual

5. INSTALLATION

. Install the components according to the descriptions and specified procedures in tf& Operation Manual
(see P-11. 5. Installation). Failure to follow any procedure might result in a fire, elacbic shock. injury, or
breakdown.
.
resulting in a fire or getting you burned.
. Be sure to ground the machine. Failure to ground may cause an electric shock in the case of leakage.
(See P-18.54 'How to Connect the Power Cord and Ground.")
. When installing this machine, always fix it with the level adjustors. Failure to fix it may cause an
accident or injury.
5-l Conditions for installation
. Do not place an object close to the vent holes in the rear and side of this machine. Do not i3ock any of
the vent holes with a wall or other object either. Failure to observe these instructions may heal up the
inside of this machine, resulting in a fire or breakdown.
5-1-l Locations to avoid installing
. This machine is designed for indoor use. Never install this machine outdoors or at any of the following
locations:
Damp places
. Places where this machine may become an obstacle in disaster prevention (such as an emergency
exit) and places where a fire extinguisher or similar equipment is placed