Pedal Assy - NAMCO TIME CRISIS 2 Operation Manual

8. MAINTENANCE

8-3-4 Pedal Assy

(1) Replacing the microswitch with a new one
Remove the four torque bolts (MS
Remove the two Phillips round head screws (with flat and spring washers) (M3 x 16) and
two fasten terminals, then detach the microswitch.
Replace the microswitch with a new one.
q
After replacing, press the
q
If the microswitch does not work well. adjust it by loosening the two dished.
nuts (M4).
Dished-end
Attach the new microswitch in reverse order.
circuit from damage.
pedal to check if the new microswitch works well.
6 6
off l t he
power switch to protect the electric
x
lips round head screw (with flat
spring washers) (M3 x 16)
.
When not pressed
When pressed
Torque bolt
.
washer
-head