Pedal - NAMCO TIME CRISIS 2 Operation Manual

8. MAINTENANCE
Remove the pedal Assy and tower Assy. (See P-2 1, C-2- 1 "Dividing" - To be conducted
by a technician only.")
q
Of the torque bolts (MS x 12)
detach the top four, thus removing the maintenance panel.
Torque bolt (M5 x
This machine may come with a monitor having a differently-shaped frame depending on
the time of production. Check which type of monitor is used, Nanao-made or Toe&made.
at the back of the
12)
\
Loosen
monitor
(Loosen the two
screws, then unplug
the connector.)
5 2
cabinet Assy, loosen the bottom Tao and
Rear panel