5-3 Assembly
5-3-l
Connecting the cabinet Assy to the tower Assy
-To be conducted by a technician only -
l
q
Install the cabinet Assy according to P-l I. 5-l "Conditions for Installation." Then lower the
four level adjustors until the casters are about 5mm from floor level (so as to rotate freely).
Level
adjustor
q
Remove the four torque bolts (M5 x 12) from the cabinet Assy and detach the joint
Install the tower Assy, fitting it to the joint.
Torque bolt (M-5x 12)
Install this machine at a position where the monitor does not reflect the incandescent
lamp. Such reflection might prevent the gun sensor from functioning. (A fluorescent
lamp is tolerable.)
Caster
5.
INSTALLATION
I
Cabinet Assy