Replacing The Plunger With A New One - NAMCO TIME CRISIS 2 Operation Manual

(2) Replacing the plunger with a new one

l
Before carrying out this task, always turn
circuit
Detach the holder. (See P45,8-l-1
Pull the plunger out of the holder, then replace it with a new one. At that time, grease the
new plunger all over.
Specified grease brand: Albania Grease No. 2 (Showa Shell)
l
Plunger
q
Wipe off the old grease from the plate of
it.
q
Reassemble in reverse order. (For adjusting the microswitch, see P-66.8-3-4 (1) "Replac-
ing the Microswitch with a New One.")
from damage.
"Greasing the Plunger of the Pedal Assy.")
the
off the power switch to protect the electric
Holder
pedal, then apply a new supply of grease to
Plate
8 . MAlNTENANCE
Grease
here