Gossen MetraWatt SECUTEST PRO Manual page 11

PRINT
ESC
HELP
MEM
PRINT
ESC
HELP
MEM
Setup 1/3 > System 2/2 > Default Settings
PRINT
ESC
HELP
MEM
Setup 1/3 > System 1/2 > Date / Time
PRINT
ESC
HELP
MEM
Figure 3: Device Settings, Submenu Level – SETUP Switch Setting
GMC-I Messtechnik GmbH
Setup 2/3 > Culture
Setup 1/3 > System 1/2
Manual selection for language and keyboard layout
Page 2/2: Info on date format,
decimal separator
Select language for user interface
Country-specific keyboard layout
for USB or touch-screen keyboard
Select language for test sequences
Jump back to next higher menu level
Menu selection for date, volume and brightness
To parameter for default values
Date and time setting menu
(see settings menu below)
Brightness setting menu for LCD
Volume setting menu
messages, user interface, measurements
Reset to default values
CAUTION ! The setup configurations
are deleted! (The database including structure
and measured values is preserved.)
Default Settings
To parameters
Self-test for display and buzzer
With SECUTEST PRO only (feature E01):
calibrate touch-screen keyboard
Jump back to next higher menu level
Set Time and Date Menu
Move cursor left
Move cursor right
Increase number
Decrease number
Accept changes and jump back
Note
The test instrument must be restarted after changing the lan-
guage, the keyboard layout and the measuring sequences.
Database structure and content remain unchanged.
11