Citizen CL-E720DT Technical Manual page 67

8. Press the [PAUSE] ( ) key several times to return to "Service Mode" main menu.
9. To operate other submenu, repeat from Step 3. Otherwise, turn off the power to
terminate Factory/Service mode.
Operation procedure for "Service Counter/Cut Center" submenu:
1. Enter Factory/Service mode by turning on the power while pressing and holding the
[MENU], [FEED] (
"Factory Setup" main menu appears.
2. Press the [MENU] or [FEED] (
3. Press the [STOP] (
4. Press the [MENU] or [FEED] (
[When selecting "Service Counter"]
Service Mode

Service Counter
5. Press the [STOP] (
Then, the service counter length since the service counter is reset last is displayed.
* To reset the service counter, proceed to the next step. Otherwise, jump to Step 7.
Length
0123.456 km
6. Resetting the service counter:
1) Press the [STOP] (
2) Press the [MENU] or [FEED] (
Reset?

No
3) Press the [STOP] (
Length
0000.000 km
7. Press the [PAUSE] ( ) key twice to return to "Service Mode" main menu.
8. To check other submenu, repeat from Step 3. Otherwise, turn off the power to
terminate Factory/Service mode.
■
) and [STOP] ( ) keys.
) key until "Service Mode" main menu appears.
■
) key to enter Service mode.
) key until a desired submenu appears.

■
) key to select "Service Counter" submenu.
■
) key.
) key and select "Yes".
 
■
) key to execute resetting.
2-53
Chapter 2 Operating Principles
Reset?

Yes
2-3.
Operation Panel
CL-E720DT