Citizen CL-E720DT Technical Manual page 62

Chapter 2 Operating Principles
2-3.
Operation Panel
Submenu Name
[Factory Mode Settings
Menu name]
Mach Hor Pos
[Machine Horizontal Pos.]
Auto Cal Mode
[AutoCal Mode]
Through LED
[See Through Sensor]
Reflect LED
[Reflect Sensor]
Thru Sensitiv
[See Through Sensitivity]
Refl Sensitiv
[Reflect Sensitivity]
Cal Thru Level
[Through Cal Level]
Cal Refl Level
[Reflect Cal Level]
Cal None Level
[SensNone Cal Level]
Peel Sens Level
Cont Paper Sens
Darkness Rate
[Darkness Rate]
Dbl Heat Menu
[Double Heat Menu]
DT Hot HeatRate
[DT Hot HeatRate Adjust]
CL-E720DT
Adjustable Value
(Default Value)
-16 to +32dot Electrically shifts the head position to the right or
(+008 dot) left side.
(-2 to +4 mm, -0.08 to +0.16 inches)
On/Off Automatically controls the light amount of each
(On) media sensor.
0.0 to 3.3V This menu is effective when "Auto Cal Mode" is
(0.0 V) set to OFF. The light amount emitted from the
light emitter can be changed when "Media
Sensor" submenu is set to "See Through".
0.0 to 3.3V This menu is effective when "Auto Cal Mode" is
(0.0 V) set to OFF. The light amount emitted from the
light emitter can be changed when "Media
Sensor" submenu is set to "Reflect".
Low, Medium, This menu is effective when "Auto Cal Mode"
High (Low) submenu is set to OFF. The sensitivity of
transparent sensor can be changed in three
steps.
Low, Medium, This menu is effective when "Auto Cal Mode"
High (Low) submenu is set to OFF. The sensitivity of
reflective sensor can be changed in three steps.
0.01 to 3.30V Performs sensitivity adjustment for "Media
(2.30V) Sensor" submenu "See Through". The amount
of light received is set to "2.30V".
0.01 to 3.30V Performs sensitivity adjustment for "Media
(2.10 V) Sensor" submenu "Reflect". The amount of light
received is set to "2.10V".
0.01 to 3.30V Performs sensitivity adjustment for "Media
(2.05 V) Sensor" submenu "None". The amount of light
received is set to "2.05V".
0.01 to 3.30V Sets the threshold value for the peel sensor.
(1.50 V)
Through/Reflect When continuous media is used, selects the
(Reflect) sensor type to be used for detecting paper end.
High, Low Selects the rate to increase or decrease the
(High) print darkness.
On/Off Selects whether to display the menu of "Double
(Off) Heat" or not.
-1.0 to +1.0% Adjusts the head temperature compensation
(0.0%) coefficient for the head temperature 25C (77F)
and higher.
To increase the print darkness, increase the
value.
2-48
Description