Table of Contents
Advertisement
•
When an optional auto cutter unit is installed, media is fed to the cut position and then
cutter unit is activated. Cutting operation is done for each feed.
•
When an optional peeler unit is installed, media is fed to the peeling position.
Note that the [FEED] (
■
[STOP] (
) key:
Stops printing or cancels an error.
•
When the [STOP] (
printing the current one label. In pause mode, if the [STOP] (
than 4 seconds, 1 batch of printing job is cancelled.
The LCD displays "Job Clear" during cancel.
[MENU] key:
Enters menu setup mode or reissues the last label.
•
When the [MENU] key is pressed in on-line ready status, the printer enters menu
configuration mode.
•
By changing the printer configuration, you can reissue the last label by pressing the
[MENU] key.
To enable this function, set the "Menu Key Action" submenu under "After Print" main menu
to "Repeat Last One".
Once you have set to "Repeat Last One", pressing the [MENU] key reissues the last label.
However, in this case, to enter menu setup mode, you need to press and hold the [MENU]
key for more than 4 seconds.
) key does not work if media is already set in the peeling position.
■
) key is pressed during printing, the printer enters pause mode after
2-37
Chapter 2 Operating Principles
2-3.
Operation Panel
■
) key is pressed for more
CL-E720DT
Hide quick links:
Advertisement
Chapters
Table of Contents
