System Reset; List Of Programming Sections - Paradox MG-RCV3 Reference And Installation Manual

7.0 System Reset

Performing a system reset will reset all the MG-RCV3 sections to their factory
default settings.
How to reset the MG-RCV3.
1. Remove the power connections from the MG-RCV3 ("
2. Press and hold the MG-RCV3's "
page 6) while reconnecting the power connections to the MG-RCV3. The
keypad will beep.
3. Wait approximately 1 second and release the "
RCV3's red LED will flash quickly for approximately 5 seconds.

8.0 List of Programming Sections

Section
[00]
[01] to [08]
[09] to [16]
[17] to [24]
[25]
20
PROGRAM
Set the installer code
Assign a user to the MG-RCV3
• Assign a remote control
• Delete an assigned remote control
Remote Control Button Programming
Options [1] to [3]: Remote control arming options
Option [4]: Enable button
Option [5]: Enable button
Option [6]: Enable button
Option [7]: Enable button
Option [8]: Enable Panic
Panic Alarm Outputs
Option [0]: No PGM output on panic alarm
Option [1]: Toggle PGM 1 on panic alarm
Option [2]: Toggle PGM 2 on panic alarm
Option [3]: Toggle PGM 3 on panic alarm
Option [4]: Toggle PGM 4 on panic alarm
RED
" button (refer to Figure 2.2 on
PROGRAM
Description
PGM
PGM
PGM
PGM
Reference & Installation Manual
" and " ").
BLK
" button. The MG-