Remote Control Button Pgm Options; Rc Button Pgm Options - Paradox MG-RCV3 Reference And Installation Manual

4.4 Remote Control Button PGM Options

[31]
SECTIONS
If a remote control's buttons have the PGM feature enabled (refer to Table 4.3
on page 14), this feature determines which PGM outputs the respective
buttons will activate. Each remote control button can be programmed to
activate a different PGM. Sections [31] to [34] correspond to remote control
buttons to
corresponding to the desired remote control button, select which PGM output
will be triggered by enabling and disabling options [1] to [4] (refer to Table 4.4
on page 15).
This feature is a global feature, therefore if button
toggle the PGM 3 output, then button
toggle the PGM 3 output.
How to set the RC button PGM options.
In step 4 in section 3.2 on page 10:
1. Enter a section number between [31] and [34].
2. Enable or disable options [1] to [4] (refer to Table 4.4 on page 15).
3. Press [
ENTER
Magellan Wireless Expansion Module
[34]:
TO OPTIONS
respectively (refer to Figure 4.2 on page 13). In the section
].
Table 4.4: RC Button PGM Options
Key [1] OFF = Disabled
Key [1] ON = Activate PGM 1 output
Key [2] OFF = Disabled
Key [2] ON = Activate PGM 2 output
Key [3] OFF = Disabled
Key [3] ON = Activate PGM 3 output
Key [4] OFF = Disabled
Key [4] ON = Activate PGM 4 output
[1] [4]
TO
on all remote controls will
is programmed to
15