Delete An Assigned User (Esprit Mode Only); Delete An Assigned Remote Control; Programmable Outputs - Paradox MG-RCV3 Reference And Installation Manual

4.5 Delete an Assigned User (Esprit mode only)

[01]
SECTIONS
Sections [01] to [08] correspond to users 1 to 8 respectively.
How to delete an assigned user.
In step 4 in section 3.2 on page 10:
1. Enter a section number between [01] and [08].
2. Press [2
3. Press [
ENTER

4.6 Delete an Assigned Remote Control

[09]
SECTIONS
Sections [09] to [16] correspond to remote controls 1 to 8 respectively.
How to delete an assigned remote control.
In step 4 in section 3.2 on page 10:
1. Enter a section number between [09] and [16].
2. Press [2
3. Press [
ENTER
5.0 Programmable Outputs (PGMs)
The MG-RCV3 provides four on-board PGM outputs, which can be used for a variety
of home/office automation applications such as opening a garage door when a
remote control button is pressed. For the PGM locations, refer to Figure 2.4 on page
8.
• PGM 1 and PGM 2: Two 150mA PGM transistor outputs
• PGM 3: Form "C" relay output rated at 5A/28Vdc, N.O./N.C
• PGM 4: Optional form "C" relay output rated at 5A/28Vdc, N.O./N.C
16
[08]
TO
].
ND
].
[16]
TO
].
ND
].
Reference & Installation Manual