Advertisement
Quick User Guide
Warning before installation
-Power off the Network camera if it is found to be smoking or smells unusual.
-Keep the Network camera away from water. If the Network camera gets wet, power
off immediately.
-Do not place the Network camera near heat sources, such as a television or oven.
-Refer to your product datasheet/specification for the operating temperature.
-Keep the Network camera away from direct sunlight.
-Do not place the Network camera in high humidity environments.
-Do not place the Network camera on unsteady surfaces.
-Do not touch the Network camera when there is lightning present.
-Do not disassemble the Network camera.
-Do not drop the Network camera.
-Do not insert any object, such as a screwdriver, into the Network camera.
For other safety and regulation information, refer to "User's manual."
1. Check Contents
No.
Item
1
Network Camera
2
Software CD
3
Quick User Guide
4
Accessories
2. Physical Description
Description
V992D-N4
User's manual, Utility software
This document
Silica gel
Template for installation
Video monitor cable
Tapping Screw M4x30: 3 pcs
Anchor: 3 pcs
Screw M4x8: 4 pcs
Surface Mount Bracket
L-Wrench (T20)
Focus Adjust Ring
Anti-reflection collar (rubber)
Network Camera
Installation of Anti-Reflection Collar
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vicon V992D-N4
Summary of Contents for Vicon V992D-N4
-
Page 1: Physical Description
-Do not insert any object, such as a screwdriver, into the Network camera. For other safety and regulation information, refer to “User’s manual.” 1. Check Contents Item Description Network Camera V992D-N4 Software CD User’s manual, Utility software Quick User Guide This document Accessories... -
Page 2: Control Button
Quick User Guide Network Camera ①Control Button -Change Video output format NTSC/PAL (toggle) -Factory Default (hold steadily for more than 10 seconds) ②Network LED ③Status LED ④Reset Button ⑤Video output for service monitor ⑥Lock nut ⑦Focus adjustment ⑧Network (RJ-45 PoE required) 3. - Page 3 Quick User Guide Network Camera 2) Select the Network type as Static or DHCP. If Static is selected, enter all of the network information for your camera. 3) Select the “Change IP Address” button. The message “Do you want to change IP address?”...
- Page 4 Quick User Guide Network Camera 5. Web Browser Connection Note: The Network camera supports Internet Explorer 7 or above. Please check version of your browser and update it if necessary. When you first access the camera you need to download and install an Active X control from the camera to display a Live View image.
Need help?
Do you have a question about the V992D-N4 and is the answer not in the manual?
Questions and answers