Table of Contents
Advertisement
Quick Links
User Guide
V9360-6 and V9360-12 Series
Network Panoramic Cameras
Vicon Industries Inc. does not warrant that the functions contained in this equipment will
meet your requirements or that the operation will be entirely error free or perform
precisely as described in the documentation. This system has not been designed to be
used in life-critical situations and must not be used for this purpose.
Document Number: 8009-8289-10-02 Product specifications subject to change without
notice. Issued: 2/18 Copyright © 2018 Vicon Industries Inc. All rights reserved.
XX289-10-02
Vicon Industries Inc.
Tel: 631-952-2288) Fax: 631-951-2288
Toll Free: 800-645-9116
24-Hour Technical Support: 800-34-VICON
(800-348-4266) UK: 44/(0) 1489-566300
www.vicon-security.com
Advertisement
Table of Contents
Related Manuals for Vicon V9360-6
Summary of Contents for Vicon V9360-6
- Page 1 Network Panoramic Cameras XX289-10-02 Vicon Industries Inc. Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the operation will be entirely error free or perform Tel: 631-952-2288) Fax: 631-951-2288 precisely as described in the documentation. This system has not been designed to be Toll Free: 800-645-9116 used in life-critical situations and must not be used for this purpose.
-
Page 2: Table Of Contents
Table of Contents Overview ..........................2 Features ........................2 Package Contents ....................... 3 Dimensions ........................5 Connectors (Indoor Only)..................... 6 Function Cables (Outdoor Only) .................. 7 Camera Cabling ........................8 Power Connection ....................... 8 Ethernet Cable Connection ..................8 Connect Alarm I/O ....................... 8 Waterproof Cable Connector (Outdoor Only) ............... -
Page 3: Overview
Overview The V9360-6 and V9360-12 Series Panoramic IP Cameras are a high resolution surveillance solution that features 360° wide coverage without blind spots. The panoramic camera supports resolution up to 12 megapixels streaming at 20 fps, which allows the videos to be viewed smoothly. Moreover, the panoramic camera supports digital PTZ, panoramic view and several display modes to fulfill users’... -
Page 4: Package Contents
Package Contents Please check that the package contains the items listed below. Indoor V9360-6 or V9360-12 Self-Tapping Screw (x3) Plastic Anchor (x3) IP Camera Security Torx Power Terminal Block Quick Guide NOTE: The supplied self-tapping screws are for soft substances / materials such as wood. - Page 5 Outdoor V9360W-6 or V9360W-12 Self-Tapping Screw Plastic Anchor Security Torx IP Camera (x3) (x3) Alarm I/O Power Quick Guide Terminal Block Terminal Block NOTE: The supplied self-tapping screws are for soft substances / materials such as wood. For other installation environments such as cement wall, users MUST pre-drill and use plastic anchors before fastening the supplied self-tapping screws on the wall.
-
Page 6: Dimensions
Dimensions The dimensions of the camera are shown below. -
Page 7: Connectors (Indoor Only)
Connectors (Indoor Only) Loosen the security screws and open the cover to access the connectors. The diagram below shows the connectors of the camera. Each connector is defined as follows. Connector Definition Remarks 12 VDC Power 12 VDC Power connection Reserved RJ-45 For network and PoE connections... -
Page 8: Function Cables (Outdoor Only)
Function Cables (Outdoor Only) Connector Definition Remarks Pink Audio In Audio I/O Two-way audio transmission Green Audio Out 12 VDC – Black Power (12 VDC) Power connection (2-Pin Terminal Block) 12 VDC + Alarm In – Alarm I/O Alarm In + Alarm connection Alarm Out –... -
Page 9: Camera Cabling
Camera Cabling Follow the instructions below to complete the cable connections. Power Connection For power connection, refer to section Connectors (Indoor Only) for the indoor models, and see section All in One Cable (Outdoor Only) for the outdoor models. Alternatively, users can power the camera by PoE if a Power Sourcing Equipment (PSE) switch is available. -
Page 10: Waterproof Cable Connector (Outdoor Only)
Waterproof Cable Connector (Outdoor Only) Follow the instructions below to waterproof the connectors of the different types of cables. The supported cables are as shown below. All-in-One Cable IP66 RJ-45 Cable All-in-One Cable Follow the steps below to waterproof the connectors of the All-in-One cable. Step 1: Connect the required devices to the All-in- One cable and coat the joints with silicone gel. - Page 11 IP66 RJ-45 Cable For IP66 RJ-45 cable, use an RJ-45 IP66 plug for connection to prevent water damage. Follow the steps below for cable connection. Step 1: Take out the supplied connector from the RJ- 45 IP66 plug. Loosen the thread-lock sealing nut on the plug.
-
Page 12: Camera Installation
Camera Installation The following description demonstrates how to directly install the camera to the ceiling or to the wall. Step 1: Loosen the two security screws on the camera with the supplied security torx and open the dome cover. Step 2: Place the camera at the installation location. -
Page 13: System Requirements
Step 5: Thread the cables through the cable entry hole. Match the two screw holes on the camera with the plastic screw anchors at the installation location. Fasten the camera with the supplied self-tapping screws. Step 6: Attach the dome cover to the camera and fasten the two security screws. System Requirements To perform the IP camera via web browser, please ensure the PC is in good network connection, and meet system requirements as described below. -
Page 14: Access Camera
Access Camera For initial access to the IP camera, users can search for the camera using the V9360-6/V9360-12 Discovery Tool (DeviceSearch.exe), which can be found on Vicon’s website, on the Software Downloads page. www.vicon-security.com Accessing the Camera by Device Search Software Step 1: Download V9360-6/V9360-12 Discovery Tool (DeviceSearch.exe) - Page 15 Step 8: A prompt window requesting for default username and password will appear. Enter the default username and password shown below to login to the camera. Login ID Password ADMIN 1234 NOTE: ID and password are case sensitive. NOTE: It is strongly advised that the administrator’s password be changed for the security concerns.
- Page 16 Once the Viewer is successfully installed, the Home page of the IP camera will be shown as the figure below. Note: When using the V9360-6/V9360-12 camera with Vicon Valerus™, the default settings for Manufacturer of Immervision and B9VVT for Lens type must be used.
- Page 17 Wall Mount Installed Camera NOTE: For more details about the function buttons on the Home page, please refer to V9360 IP Camera Menu Tree on the Vicon website, vicon- security.com.
-
Page 18: Setup Video Resolution
H.264 - 3072 x 2048 (30/25 fps) Back End 12 MP H.264 - 4000 x 3000 (20 fps) Back End NOTE: For more details about the combinations of video resolution, please refer to the V9360 IP Camera Menu Tree on the Vicon website. -
Page 19: Configuration Files Export / Import
Configuration Files Export / Import To export / import configuration files, users can access the Maintenance page on the user-friendly browser-based configuration interface. The Maintenance setting can be found under this path: System> Maintenance. Users can export configuration files to a specified location and retrieve data by uploading an existing configuration file to the camera. -
Page 20: Tech Support Information
Tech Support Information This chapter will explain how to delete previously-installed Viewer in the PC and how to setup the Internet security. Delete the Existing DCViewer For users who have installed the DCViewer in the PC previously, remove the existing DCViewer from the PC before accessing to the IP camera. Deleting the DCViewer In the Windows <Start Menu>, activate <Control Panel>, and then double click on <Add or Remove Programs>. -
Page 21: Setup Internet Security
Setup Internet Security If ActiveX control installation is blocked, either set Internet security level to default or change ActiveX controls and plug-ins settings. Internet Security Level: Default Step 1: Start the Internet Explorer (IE). Step 2: Click on the <Tools> tab on the menu bar and select <Internet Options>. Step 3: Click on the <Security>...
Need help?
Do you have a question about the V9360-6 and is the answer not in the manual?
Questions and answers