AND HV-15KC Instruction Manual page 61

The control codes $SP, $CR and $LF can be used with "
number". That code will be repeated the number of times designated.
Example: $LF 9
 Link mark "&"
If you will send more than 2 lines of data, attach "&" to the end of the first line. Then,
the scale considers the data to be continued.
"Space" or "," will be used to separate these data. You can skip them, but you cannot
skip "," after "PF". You must start with "PF,".
Data Format for the Scale Data
Parameters for the scale data will be replaced by the format below when the scale sends
them out.
Data has a fixed number of digits including a sign and a decimal point. The
insignificant zeros are replaced by "Space (20H)" (except the ID number).
$PC
$WT
$TR
$TL
$AN
$CD
$CP
$DT
$TM
HV/HW-C/CP Series
Repeat "$LF" 9 times.
$SP 12 Put 12 "Spaces".
+ 1 2 3 4
+ 1 2 . 3 4
+ 1 2 . 3 4
1 2 3 . 4 0
1 0 10 times / 8 digit data
0 0 0 1 2 3 ID Number 000123 / 6 digit data
L 0 2 Result is "LOLO" / 3 characters, LO2, LO1, HI1, HI2
O K Result is "OK" / 2 characters
Result is not available.
2 0 1 7 / 0 3 / 1 8 YYYY / MM / DD
1 2 : 3 4 : 5 6 12(h) 34(m) 56(s)
" " in examples below shows "Space" (20H).
P C 1234 pcs / 9 digit data + 3 digit unit
k g 12.34 kg / 9 digit data + 3 digit unit
k g 12.34 kg / 9 digit data + 3 digit unit
k g 123.40 pcs / 9 digit data + 3 digit unit
Page 59
+ maximum 2 digit