Table of Contents
Advertisement
6000 Series Purge/Pressurization System
EPV-6000 vent
Tools:
1 1/2" NPT knockout (
vent
Vent mounted on the outside of the enclosure
Pressurized enclosure
6000 control unit
I.S. wire tag
(included)
Vent mounted on the inside of the enclosure
Pressurized enclosure
6000 control unit
I.S. wire tag
(included)
Vent is not gravity sensitive and can be installed
in any orientation.
Note
14
50.8 mm] hole ) for
Ø 2" [
*Reference tubing and hardware included with EPV-6000-SS models
Locking nut w/grounding screw
(included)
Seal gasket (included)
Ø 2" (50.8 mm)
EPV-6000
Vent cable (included)
Ø 2" (50.8 mm)
Seal gasket (included)
Locking nut w/o ground
Hex screws 0.05"(1.3 mm) (3)
*Bulkhead fitting for reference
EPV-6000
*Reference tube
Cord grip CG-8
(optional)
Vent cable (included)
Cable to the vent is I.S. wiring and must be
properly isolated from other wiring.
Warning
I/O Manual
Vent cap
(included)
(included)
Vent cap (included)
pressure
Hide quick links:
Advertisement
Table of Contents
