Declaration Of Conformity - Open Date EUROCODE 150 Operator Instructions Manual

Eurocode Digi50 Controller V1.03
EC DECLARATION OF CONFORMITY (Passed EMC Tests 24 November 2004)
We hereby declare that the following machinery complies with the essential health and
safety requirements of the Machinery Directive 98/37/EC, and the Low Voltage Directive
73/23/EEC and its amendments, and the requirements of the Electromagnetic Compatibility
Directive 89/336/EEC and its amendments.
Machine Description:
Model:
Type:
Serial number:
Manufactured by:
Address
The following transposed harmonised European standards have been used .
BS EN ISO 12100: part 1, 2003.
design. Basic terminology, methodology.
BS EN ISO 12100: part 2, 2003.
design. Technical principles.
EN294: 1992.
Safety of machinery. Safety distances to prevent danger zones being reached by
the upper limbs.
BS EN 563:1994.
establish temperature limit values for hot surfaces
EN60204: part 1, 1997.
general requirements.
BS EN 61000-6: part 4, 2001.
Emission standard for industrial environments.
BS EN 61000-3: part 2, 2000.
current emissions. (equipment input current up to and including 16 A per phase)
BS EN 61000-3: part 3, 1994.
changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with
rated current <= 16 A per phase and not subject to conditional connection.
BS EN 61000-6: part 2, 2001.
Immunity standard for industrial environments.
FCC Part 15 Verification , Class A.
In addition, this machinery has been designed and manufactured in accordance with:-
PD 5304:2000,
A technical construction file for this machinery is retained at the above address.
............................................
Signed:
K.F. Wingfield.
Name
Signing on behalf of the manufacturer.
04/07/2005
Hot Foil Printer with Digi50 Controller.
Eurocode
.....................
.....................
Open Date Equipment Limited.
Units 8 & 9, Puma Trade Park,
145 Morden Road,
Mitcham,
Surrey. CR4 4DG
United Kingdom.
Safety of machinery. Basic concepts, general principles for
Safety of machinery. Basic concepts, general principles for
Safety of machinery. Temperatures of touchable surfaces. Ergonomics data to
Safety of machinery. Electrical equipment of machines. Specification for
Electromagnetic compatibility (EMC). Generic standards.
Electromagnetic compatibility (EMC). Limits. Limits for harmonic
Electromagnetic compatibility (EMC). Limits. Limitation of voltage
Electromagnetic compatibility (EMC). Generic standards.
Safe use of machinery.
.
Conducted and Radiated Emissions.
...........................................
Date:
Service Manager
Position
Page - 3 -