2.7
Installing Expansion Card
1.
Follow the procedures in Chapter 2.3 to remove rear cover
2.
Remove the screws and the blank plate marked with a red rectangle to install
the expansion card. The product comes with a PCIE riser card, and a PCI riser
card is also provided in the accessory box for additional use.
Note!
The maximum supported size of the expansion card is 176mm x
107mm.
2.8
Adjusting AT/ATX Functions
You can adjust AT or ATX function by the internal switch indicated by the red rectan-
gle without removing the rear cover.
2.9
Grounding
Grounding screw is marked with a red circle in below. It is recommended that the
product with a capacitive screen should be properly grounded.
15
PPC-3151 User Manual