Hardware Installation; Installing The Card In Your Computer - Advantech PCL-734 User Manual

Hardware
Warning! TURN OFF your PC power supply whenever you

Installing the card in your computer

1. Turn the computer off. Turn the power off to any peripheral
devices such as printers and monitors.
2. Disconnect the power cord and any other cables from the back of
the computer.
3. Remove the system unit cover (refer to your user's guide chassis
user's guide if necessary).
4. Locate the expansion slots at the rear of the unit and choose any
unused slot.
5. Remove the screw that secures the expansion slot cover to the
system unit. Save the screw to secure the interface card retaining
bracket.
6. Carefully grasp the upper edge of the PCL-734 card. Align the
hole in the retaining bracket with the hole on top of the expansion
slot and align the gold striped edge connector with the expansion
slot socket. Press the board firmly into the socket.
7. Secure the PCL-734 using the screw you removed in step 5.
8. Attach any accessories (i.e. a DB-37 cable, etc.) to the PCL-734.
9. Replace the system unit cover. Connect the cables you removed in
step 2. Turn the computer power on.
installation
install or remove the PCL-734 or connect and
disconnect cables.
Chapter 2 Installation 9