Installing The Microphone; Connecting The Microphone - Tait TM8105 User Manual

Installing the microphone

A microphone and microphone clip are only used for radios
with a user interface.

Connecting the microphone

Caution:
To install the microphone:
1
2
3
4
Installing the microphone clip
Caution:
Install the microphone clip in the most convenient location
for the radio user. It must be installed:
The microphone grommet must be installed when-
ever the microphone is plugged into the micro-
phone socket. When installed, the grommet has
two functions:
to prevent damage to the microphone socket when there
is movement of the microphone cord, and
to ensure that the control head is sealed against water,
dust and other environmental hazards.
Plug the microphone into the microphone socket.
Slide the microphone grommet along the microphone
cord and push two adjacent corners of the grommet into
the microphone socket cavity.
Squeeze the grommet and push the remaining corners
into position.
Check that the grommet is seated correctly in the cavity.
Only install the microphone clip provided. If a non-
standard microphone clip is used, the correct oper-
ation of the microphone hookswitch cannot
be guaranteed.
within easy reach of the user, and
in such a position that the microphone PTT key cannot be
inadvertently activated or jammed on.
microphone
grommet
control head
Radio installation 31