Telephone Line Connection To The Bluetooth ® Ap Charging Base Station - VeriFone VX 680 Installation Manual

T S
ERMINAL ETUP
®
VX 680 Bluetooth Support
Telephone Line
Connection to the
®
Bluetooth
Charging Base
Station
To connect a
telephone line to the
®
Bluetooth AP Base
NOTE
28
VX 680 I
NSTALLATION
The VX 680 supports telephone line connections through a USB Modem Dongle
connected to the phone cable. However, the VX 680 WiFi/BT variant does not
support this feature.
AP
1
Connect the small connector on the modem cable to the modem port on the
®
Bluetooth
AP Charging Base Station, as shown in
2
Plug the modem cable directly to a telephone wall jack or use a 'T' connector if
sharing the telephone line with other equipment.
Figure 12 Telephone Line Connection to the Bluetooth
Base Station
®
The Bluetooth AP Charging Base Station MUST be connected to the telephone
line at ALL times for all of the terminal's facilities to function properly.
G
UIDE
Figure 12.
®
AP Charging