Connecting The Terminal Power Pack - VeriFone VX 680 Installation Manual

Connecting the
Terminal Power
Pack
CAUTION
WARNING
To Connect the
Terminal Power Pack
NOTE
After installing the smart battery, connect the VX 680 terminal to the provided
power source for initial charging.
Using an incorrectly rated power supply may damage the terminal or cause it not
to work as specified. Before troubleshooting, ensure that the power supply being
used to power the terminal matches the requirements specified on the bottom of
the terminal. (See Specifications
the appropriately rated power supply before continuing with troubleshooting.
Do not plug the power pack into an outdoor outlet or operate the terminal
outdoors.
During a transaction, disconnecting the power by removing the battery or
unplugging the terminal from a wall power while at very low battery charge may
cause transaction data files not yet stored in the terminal memory to be lost.
The VX 680 unit comes with a universal input power pack capable of operating
from voltages of 100V to 240V AC.
1
Insert the round barrel connector into the power port in the connector, as
shown in Figure 26.
Figure 26 VX 680 Power Pack Connection
2
Insert the AC power cable into the power pack.
3
Plug the AC power cable into a wall outlet or powered surge protector.
To protect against possible damage caused by lightning strikes and electrical
surges, consider installing a power surge protector.
The light indicators on the VX 680 appear when the terminal receives power.
Once it loads the application, the terminal starts the initial VeriFone copyright
screen and displays a unique copyright screen. If there is no available application
in the terminal,
DOWNLOAD NEEDED
copyright screen.

Connecting the Terminal Power Pack

for detailed power supply specifications.) Obtain
appears on screen after the initial VeriFone
T
ERMINAL
VX 680 I G
NSTALLATION UIDE
S
ETUP
39