Power Connection To The Bluetooth ® Ap Charging Base Station - VeriFone VX 680 Installation Manual

Power Connection
®
to the Bluetooth
AP Charging Base
Station
To Connect the Power
Pack
WARNING
NOTE
®
The Bluetooth AP Charging Base Station comes with a universal-input power
pack capable of operating from voltages of 100V-240V AC.
1
Insert the round barrel connector into the power port on the Bluetooth
Charging Base Station, as shown in
Figure 11 Power Connection to the Bluetooth
Station
2
Insert the AC power cord into the power pack.
3
Plug the AC power cord into a wall outlet or powered surge protector.
4
Confirm that the Base Station is powered up as indicated by the solid green
LED.
Do not plug the power pack into an outdoor outlet or operate the terminal
outdoors.
To protect against possible damage caused by lightning strikes and electrical
surges, consider installing a power surge protector.
VX 680 Bluetooth
Figure 11.
®
AP Charging Base
VX 680 I
T S
ERMINAL ETUP
®
Support
®
AP
27
G
NSTALLATION UIDE