Set Up A Direct Telephone Connection; Pass-Through Telephone Line Connection - VeriFone Omni 3200 Reference Manual

Set Up a Direct Telephone Connection

Step 4: Connect the Terminal to a Telephone Line
2. Insert the connector on the other end of the telephone line cord
into the empty RJ11-type modular jack located on the telephone
base unit.
Caution: If you use a pass-through connection for your terminal, do
not attempt to make a normal telephone call while the terminal is
processing a transaction. Lifting up the handset may disrupt the carrier
signal and cause transaction processing to fail.
Figure 7 Pass-Through Telephone Line Connection
To set up a direct telephone line connection from the Omni 3200
terminal to a telephone company wall jack (see Figure 8):
1. Insert the connector on one end of the telephone line
cord into the Telco port on the back panel of the
terminal. (The Telco port is identified by the icon
shown to the right.)
Setting Up the Terminal
9