Remote Control - LASIAN AUDAX 6 KW User And Installation Manual

6.2.4- REMOTE CONTROL

This function is destined to activate/deactivate the remote control working.
This menu is disabled (OFF) from factory settings, but in case you purchase a remote control it will be necessary
to activate this function (ON).
6.2.5- CLEANING RESET (rCLr)
Function to reset the hours meter when it appears the message "Ordinary maintenance" after the stove has been
working 300 hours.
This message notifies the user that a deep cleaning of the stove must be done.
Once the cleaning is done, enter to the function "rCLr" by pushing the button
display on top we see "RES" when pushing
again, the meter resets and the message disappears.
To return to the main menu push ESC
6.2.6- TECHNICAL MENU (TPAr)
This menu is to enter to the SAT parameters that are reserved to the Technical Assistance Service.
The access is protected by a password.
7. USE AND WORKING OF THE STOVE
7.1 ADVICE AND WARNING
- Do not use the stove as incinerator or in any manner other than the one that has been designed to.
Use only the kind of pellet that the manufacturer allows (see chapter "4- FUEL").
-
- Before turning on the stove, make sure that there is nothing inside, sticked on the stove or next to it, there is
no inflammable material or combustible material.
- The external surfaces of the stove, in particular the glass, reach high temperatures to the touch when it is
working. Proper precautions should be taken to avoid burns.
- Do not make any unauthorised modification in the device.
- Use only original spare parts recommended by the manufacturer.
- Whenever you have any doubt, consult and read carefully this manual. Do not handle the control panel until
you are sure that you know how the procedure works, the effect that the working of the stove has, and how to
revert it in case it is necessary.
COD. 83119L.01EN
Display
07:30
Mo
(P3) and the word "SURE" appears flickering. If we push
(P1) repeatedly.
32
(P3) from User menu 2, in the
09//2016
(P3)