Instructions Of The Control Panel - LASIAN AUDAX 6 KW User And Installation Manual

6. INSTRUCTIONS OF THE CONTROL PANEL

The control panel consists in 4 push-buttons and 2 displays of four digits each one, they also include seven LEDS
which provide information. The layout is as follows:
The display on top shows only a piece of information, whereas the display below may provide us several pieces of
information sometimes. In order to know what they displays are saying in every moment, we have sorted them as
it is shown in the image and depending on the screen they can show:

Display D1: Time, operating conditions, failures, menu, sub-menu and parameter values.

Display D2: Power and parameter codes (only if the stove is working)

Display D4: Room temperature and parameter values.
The push-buttons have different functions depending on the screen we are in, and depending on whether the
keystroke is short (Clic) or long (long keystroke):
PUSH-BUTTON
(P1)
(P2)
(P3)
(P4)
Para saber qué tenemos activado en cada momento, utilizamos los leds que se iluminan junto al símbolo o la letra
correspondiente:
L1
L2
L3
L4
L5
L6
L7
COD. 83119L.01EN
Clic
Information / Menu exit
Thermostat modification (+) / Value
increase
Output combustion modification /
Data storage
Thermostat modification (-) / Value
decrease
WHEN THE LED LIGHTS UP
Room fan is on
Load auger is spinning
Ignition resistor is heating
Room temperature reached
G Daily programming is activated
S Weekly programming is activated
W Weekend programming is activated
FUNCTION
LONG KEYSTROKE
On / Off / Alarm reset
Pellet load calibration
Pellet manual load
Combustion fan calibration
24
09//2016