SuperEasy GSM Module User Manual
GL300W Data Cable
(Optional accessory)
GL300W External Cable
(Optional accessory)
3.2. Battery Charging
Please connect AC‐DC power adapter with GL300W.
Insert the AC‐DC power adapter into the power socket.
During charging, the PWR LED is flashing fast. When the battery is full charged, the PWR LED
will be Ever‐light.
You can also charge the battery by USB cable which connects GL300W with the PC.
Charging time is about 5 hours.
Note: Before the first time using GL300W, please full charge the battery.
3.3. GL300W External Cable Interface
GL300W External Cable is a cable with a Mini USB connector and six wires which include
the external power interface, ignition detect and input interface for GL300W. Please
find the detail description in following table.
Color
Name
RED
External DC IN (5V)
Black
Ground
Blue
External Battery IN (DC 3.4V to 4.2V)
TRAC SuperEasyUM001 5
Remark
Please refer to 2.4.1 for detail
Please refer to 2.4.1 for detail
Please refer to 2.4.2 for detail
It is the USB data cable which
can be used for firmware
upgrading and configuration.
It is the extend cable which
include the charger interface
and external battery interface
on GL300W. It also includes the
ignition detection interface on
the GL300W.