Table of Contents
Advertisement
Phone Directory (continued)
Changing a stored name and/or phone
number
1
Display the name and phone number you want
to change by doing steps 1 and 2 in "Making
calls from the Phone Directory" on page 35.
2
Press Jog Dial.
3
Turn Jog Dial up to make "EDIT" flash and
press Jog Dial.
The cursor flashes at the last character of the
name.
4
Turn Jog Dial down to erase the characters and
enter the new name.
If you want to change only the number, skip this
step.
5
Press Jog Dial.
The cursor flashes at the last digit of the phone
number.
6
Turn Jog Dial down to erase the number and
enter the new number.
If you don't want to change the number, skip
this step.
7
Press Jog Dial.
You will hear a long confirmation beep and the
name and/or the number is changed.
Tip
When the phone number of 17 digits or more has been entered, "–" is displayed
next to 15th digit and then the all digits are displayed in two lines after about
two seconds.
34
US
Telephone Features
Phone Directory (continued)
Tips
• You may press (LINE 1) or (LINE 2) to make a call instead of doing steps 3
and 4.
• When you press Jog Dial in step 4, the vacant line is automatically connected.
When neither line is in use, line 1 is connected.
About the search order
The names appear in the following order when you turn Jog Dial up or
down.
• Alphabetical order: ABC...XYZ y symbols y * y # y 0 - 9
• Initial character: To search for "SONY" for example, press (7) and
then turn Jog Dial to search through the names starting with P, Q, R,
S or 7.
US
36
Telephone Features
Erasing a memory location
1
SONY
1234567
2
DIAL EDIT ERASE
3
1234567
4
SON
Y
1234567
Making calls from the Phone Directory
SMITH
1234567
(LINE 2)
(LINE 1)
Setting the ringer type
You can select a ringer type of the handset from four type.
– 9 –
Display the name and phone number you want
to erase by doing steps 1 and 2 in "Making calls
from the Phone Directory".
Press Jog Dial.
Turn Jog Dial up to make "ERASE" flash and
press Jog Dial.
Turn Jog Dial up to make "YES" flash, then
press Jog Dial.
You hear a long confirmation beep and the memory location is erased.
1
Press Jog Dial.
"DIRECTORY" appears on the
Turn
Press
display.
2
Display the name and phone number
you want to call.
To search in alphabetical order: Turn
Jog Dial up or down.
To search by entering the initial
character: Press the dialing key of the
desired character, then turn Jog Dial.
SONY
1234567
3
Press Jog Dial.
DIAL EDIT ERASE
1234567
4
Press Jog Dial again.
The phone number will be
dialed.
1
Press (PGM).
2
Turn Jog Dial up to make "RINGER"
Turn
Press
flash.
DIRECTORY AREA
RINGER
3
Press Jog Dial.
LINE1 LINE2
4
Turn Jog Dial to choose the line you
want to set the ringer type.
5
Press Jog Dial.
The current ringer type appears.
RINGER 1
SELECTED
6
Press one of the dialing keys ((1) to
(4)) to select a ringer type.
You will hear the corresponding ringer
tone.
7
Press (OFF).
SONY
1234567
DIAL EDIT ERASE
1234567
ERASE NO YES
1234567
continued
US
35
Telephone Features
continued
37
US
Telephone Features
Advertisement
Table of Contents
