Setting The Ringer Type; Switching The Phones During A Call; Talking Between The Phones (Intercom) - Sony SPP-ID975 Service Manual

Setting the ringer type

You cm s&d a ringer h/pe of the handset from four type
Jog Dial up to make "RINGER"
flash.
3
Press Jog Dial.
The current
4
Press one of the dialing keys (0 to
You will hear the correspondiig
tone.
Turning off the ringer of the handset
Press @I.
You will hear a confirmation beep.
Press (OFF).
When "RINGER" is set to "RINGER OFF"
The handset won't rining. You cm otill make calls. and aiso receive
calls if mother telephone connected to the same line rings to inform
you ml incoming calls
To two the ringer on again

Talking between the phones (Intercom)

To talk from the handset to
the base phone
P r e s s (
INTERCOM
After the base phone rings twice, you
will be connected automatically.
When a person
answers, you can talk with each other.
"INTERCOM" appears on the display.
When you am done talking
Press m on the handset.
If no one answers the phone
Press (NTERCOM)
To talk from the base
phone to the handset
Press ( NTERCO
I
The base phone and handset ring and
display.
When a person at the handset presses
(TALK) or (INTERCOM), YOU can talk
When you are done talking
Press (
S
phone.
If no one answers the phone
Press <INTERCOM)
All manuals and user guides at all-guides.com
type appears
ringer
type".
) on the handset.
at the base phone
again.
) on the base phone.
M
Xx" appears on the
appears on the display.
PEAKE O ) on the base
RPH NE
again.

Switching the phones during a call

You can easily switch between the handset and speakerphone on the
the call.
To switch from the base phone to the handset
The call is on hold and "HOLD"
appears on the display and the
SPEAKERPHONE lamp on the
base phone
handset.
YOU
caller through the handset.
To switch from the handset to the base phone
Press (HOLD)
The call is on hold and "HOLD"
LINE lamp on the base phone
flashes.
Press (SPEAKERPHONE_)
You can continue talking to the
caller ihrough
speakerphone.
flashes. .
can continue talking to the
on the handset.
on the display and the
on the base phone.
the