Table of Contents
Advertisement
Setting the ringer type (continued)
Turning off the ringer of the handset
1
Perform steps 1 to 5 on page 37.
2
Press (0).
You will hear a confirmation beep.
3
Press (OFF).
When "RINGER" is set to "RINGER OFF"
The handset won't ring. You can still make calls, and also receive
calls if another telephone connected to the same line rings to inform
you on incoming calls.
To turn the ringer on again
Follow the instructions described in "Setting the ringer type" on
page 37.
38
US
Telephone Features
Talking between the phones (Intercom)
You can converse using the base unit and the handset. You can start
the intercom from either phone.
(OFF)
INTERCOM lamp
(OFF)
US
40
Telephone Features
RINGER OFF
SELECTED
To talk from the handset to
the base unit
Press (INTERCOM) on the handset.
After the base unit rings twice, you
will be connected automatically.
When a person at the base unit
answers, you can talk with each other.
"INTERCOM" appears on the display
of the handset and the INTERCOM
lamp on the base unit lights up.
When you are done talking or if no
one answers the phone
Press (OFF) on the handset.
To talk from the base unit
to the handset
Press (INTERCOM) on the base unit.
The base unit and handset ring and
"** PAGING **" appears on the
display of the handset.
When a person at the handset presses
(INTERCOM), you can talk with each
other.
"INTERCOM" appears on the display
of the handset and the INTERCOM
lamp on the base unit lights up.
When you are done talking or if no
one answers the phone
Press (OFF) on the base unit.
Switching the phones during a call
You can easily switch between the handset and speakerphone on the
base unit without disconnecting the call. The call on line 1 will be
switched to line 1 on another phone and that on line 2 is switched to
line 2.
To switch from the base unit to the handset
Example: While talking on line 1:
(LINE 1)
To switch from the handset to the base unit
Example: While talking on line 1:
(LINE 1)
Tip
While talking through the speakerphone on the base unit (or handset), if you
press (LINE 1) or (LINE 2) which is flashing on the handset (or base unit), you
can talk to the base unit (or handset) and to the line connected.
Note
While conversing with an outside caller via the base unit or handset, you
cannot make an intercom call. If you press (INTERCOM), you will hear a busy
tone.
Tips
• You can receive an intercom call on the handset even when "RINGER" is set
to "RINGER OFF".
• You can receive an intercom call on the base unit even when the L1 or L2
RINGER LEVEL switch on the base unit is set to OFF. The base unit will ring
at a low level.
Receiving a call while using the intercom
When a call comes in, "** RINGING **" appears on the display of
the handset and only the base unit rings at a low level.
The LINE 1 or LINE 2 button flashes.
Press (LINE 1) or (LINE 2) whichever is flashing, then you can answer
the call.
– 10 –
1
Press (HOLD) on the base unit.
The call is on hold and "HOLD"
appears on the display of the
handset and the LINE 1 button
flashes slowly.
2
Press (LINE 1) on the handset.
The LINE 1 button on the handset
lights up and the LINE 1 button on
the base unit double flashes in
succession.
You can continue talking to the
caller through the handset.
1
Press (HOLD) on the handset.
The call is on hold and "HOLD"
appears on the display of the
handset and the LINE 1 button
flashes slowly.
2
Press (LINE 1) on the base unit.
The LINE 1 button on the base unit
lights up and the LINE 1 button on
the handset double flashes in
succession.
You can continue talking to the
caller through the speakerphone.
Telephone Features
Telephone Features
US
39
41
US
Advertisement
Table of Contents
