Configuration Defaults - Omega DPF700 User Manual

Feature
Operating Mode (Function)
Scale
Offset
Decimal Point
Setpoints
Configuration
0 0 0 0 0
Determines analog output signal.
0 4-20 mA
1 0-10V
0 Unlatched
1 Latched
0 Setpoint LO works as active below the setpoint
1 Setpoint LO works as active above the set-point
(similar to setpoint HI).
0 Message handshake - If RTS input is true,
sends complete message
1 Character handshake - Checks RTS input before sending each character, and
sends characters only while RTS is true.
0
1
F
ACTORY
Table 12-2. Configuration Defaults
6 Digits of Configuration
0
Determines the communication rate.
9600 baud rate
1200 baud rate
0 Transmits alarm status (total of 9 characters)
1 Does not transmit alarm status character
D
EFAULT
Default Description
Rate
Multiply by 1.00000
0.00000
Fixed decimal point: FFFFFF.
HI = 10000. LO = 10.
6 digit display.
Each digit may be 0 (default) or 1.
Configuration is detailed below.
12
V
ALUES
65