Omega DP25-TC Quick Start Manuals

5
To Set the Decimal Point
1. If it's not already shown,
press MENU until the unit
displays DEC.P
SETPTS /MAX /DEV
2. Press /DEV to show the
current decimal point location.
SETPTS /MAX /DEV
3. Press /MAX to move the
decimal point to the desired
location. The choices are
FFFF or FFF.F.
SETPTS /MAX /DEV
4. Press MENU to store the value.
SETPTS /MAX /DEV MENU RESET SETPTS /MAX /DEV
5. Press RESET twice to display the current temperature.
To Select Temperature Unit
(Fahrenheit or Celsius):
1. Press MENU until the display
shows RD.CF
SETPTS /MAX /DEV
2. Press /DEV to display the
current temperature unit.
SETPTS /MAX /DEV
3. Press /MAX to select
between °F and °C.
SETPTS /MAX /DEV
6
4. Press MENU to store the value.
/MAX
SETPTS /DEV MENU RESET
MENU RESET
5. Press RESET twice to display the current temperature.
To Enter Setpoints:
1. Press SETPTS to display the
MENU RESET
current setpoint. The leftmost
digit will flash.
2. Press /DEV to select the
MENU RESET digit you want to change.
3. Press /MAX to increase the
value of the flashing digit.
MENU RESET
4. Press SETPTS to store the
setpoint.
5. Repeat steps 1 through 4 to enter the next setpoint.
MENU RESET
WARNING: These products are not designed for use in, and should not be used
for, patient connected applications.
This device is marked with the international caution symbol. It is important
MENU RESET
to read the Setup Guide before installing or commissioning this device as
it contains important information relating to safety and EMC.
It is the policy of Omega to comply with all worldwide safety and EMC/EMI
regulations that apply. Omega is constantly pursuing certification of its products to the
European New Approach Directives. Omega will add the CE mark to every
appropriate device upon certification.
The information contained in this document is believed to be correct but Omega
Engineering, Inc. accepts no liability for any errors it contains, and reserves the right
to alter specifications without notice.
MENU RESET
WARRANTY/DISCLAIMER
OMEGA ENGINEERING, INC. warrants this unit to be free of defects
in materials and workmanship for a period of 61 months from date
of purchase. OMEGA's WARRANTY adds an additional five (5) month
grace period to the normal one (1) year product warranty to cover
handling and shipping time. This ensures that OMEGA's customers
receive maximum coverage on each product.
If the unit malfunctions, it must be returned to the factory for evaluation.
OMEGA's Customer Service Department will issue an Authorized
Return (AR) number immediately upon phone or written request. Upon
examination by OMEGA, if the unit is found to be defective, it will be
repaired or replaced at no charge. OMEGA's WARRANTY does not
/MAX
SETPTS /DEV MENU RESET
apply to defects resulting from any action of the purchaser, including
but not limited to mishandling, improper interfacing, operation outside
of design limits, improper repair, or unauthorized modification. This
WARRANTY is VOID if the unit shows evidence of having been tampered
with or shows evidence of having been damaged as a result of excessive
corrosion; or current, heat, moisture or vibration; improper specification;
misapplication; misuse or other operating conditions outside of
OMEGA's control. Components in which wear is not warranted, include
but are not limited to contact points, fuses, and triacs.
OMEGA is pleased to offer suggestions on the use of its various
products. However, OMEGA neither assumes responsibility for
any omissions or errors nor assumes liability for any damages
that result from the use if its products in accordance with
information provided by OMEGA, either verbal or written.
OMEGA warrants only that the parts manufactured by the
company will be as specified and free of defects. OMEGA
MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF
SETPTS /MAX /DEV MENU RESET ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT
THAT OF TITLE, AND ALL IMPLIED WARRANTIES INCLUDING
ANY WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIMITATION
OF LIABILITY: The remedies of purchaser set forth herein are
exclusive, and the total liability of OMEGA with respect to
this order, whether based on contract, warranty, negligence,
indemnification, strict liability or otherwise, shall not exceed the
purchase price of the component upon which liability is based.
In no event shall OMEGA be liable for consequential, incidental
SETPTS /MAX /DEV MENU RESET
or special damages.
CONDITIONS: Equipment sold by OMEGA is not intended to be used,
nor shall it be used: (1) as a "Basic Component" under 10 CFR 21
(NRC), used in or with any nuclear installation or activity; or (2) in
medical applications or used on humans. Should any Product(s) be
used in or with any nuclear installation or activity, medical application,
used on humans, or misused in any way, OMEGA assumes no
responsibility as set forth in our basic WARRANTY/DISCLAIMER
language, and, additionally, purchaser will indemnify OMEGA and hold
OMEGA harmless from any liability or damage whatsoever arising out
SETPTS /MAX /DEV MENU RESET
of the use of the Product(s) in such a manner.
RETURN REQUESTS/INQUIRIES
Direct all warranty and repair requests/inquiries to the OMEGA Customer
Service Department. BEFORE RETURNING ANY PRODUCT(S) TO OMEGA,
PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER
FROM OMEGA'S CUSTOMER SERVICE DEPARTMENT (IN ORDER TO
AVOID PROCESSING DELAYS). The assigned AR number should then be
marked on the outside of the return package and on any correspondence.
SETPTS /MAX /DEV MENU RESET
FOR WARRANTY RETURNS,
please have the following
information available BEFORE
contacting OMEGA:
1. Purchase Order number under
which the product was
PURCHASED,
2. Model and serial number of
the product under warranty, and
3. Repair instructions and/or
specific problems relative to
the product.
OMEGA's policy is to make running changes, not model changes,
whenever an improvement is possible. This affords our customers the
latest in technology and engineering.
OMEGA is a trademark of OMEGA ENGINEERING, INC.
© Copyright 2018 OMEGA ENGINEERING, INC. All rights reserved.
This document may not be copied, photocopied, reproduced, translated, or
reduced to any electronic medium or machine-readable form, in whole or in
part, without the prior written consent of OMEGA ENGINEERING, INC.
MQS3732/0918
For complete product manual:
www.omega.com/manuals/manualpdf/M3732.pdf
5
TM
FOR NON-WARRANTY REPAIRS,
consult OMEGA for current repair
charges. Have the following
information available BEFORE
contacting OMEGA:
1. Purchase Order number to cover
the COST of the repair or
calibration,
2. Model and serial number of the
omega.com info@omega.com
product, and
3. Repair instructions and/or specific
problems relative to the product.
U.S.A.
Headquarters:
DP25-TC and DP25B-TC
Programmable Digital
Thermocouple Controller
Servicing North America:
Omega Engineering, Inc.
Toll-Free: 1-800-826-6342 (USA & Canada only)
Customer Service: 1-800-622-2378
(USA & Canada only)
Engineering Service: 1-800-872-9436
(USA & Canada only)
Tel: (203) 359-1660 Fax: (203) 359-7700
e-mail: info@omega.com
For Other Locations Visit omega.com/worldwide