About The Meter; Description; Features - Omega DPF700 User Manual

2.1 DESCRIPTION

The meter is a fully programmable ratemeter/ totalizer/ controller with six-digit resolution for
totalizing input pulses or rate measuring.
Alphanumeric display prompts make it easy to program with front-panel buttons. You may use a
personal computer to program the meter and monitor the display data using the RS-232 option.
You may store the program setup in the nonvolatile memory for recall upon demand or at power-
on.
The crystal timebase is electronically calibrated. There are no internal adjustments and
calibration is done without opening the case. Available options include field-installable dual-relay
option card, RS-232 and analog output cards.

2.2 FEATURES

The following is a list of features:
* 6-digit, single input
* NEMA 4 / Type 4 Front Bezel
* Display of any engineering unit
* Front-panel scaling
* 0.5 Hz to 30 kHz frequency inputs
* Signal conditioner standard for low level inputs
* DIP switch input selection
* Sensor excitation of 5, 8.2 and 12.4 Vdc
* Front-panel programmable as rate meter or totalizer
For more detailed information on meter features, refer to Tables 6-1 and 6-2.
A T M
BOUT HE
2
ETER
3