3
G
3.5 SELECTING MAIN MENU ITEMS
Note
Refer to Table 6-1 for summary list of menu configurations.
1. Press the MENU button. The meter shows a main menu item.
Continue to press the MENU button to scroll through main menu items.
2. Once the desired main menu item shows, press the £ SET button to show the item's
current value or the active sub-menu item.
3.6 SELECTING SUB-MENU ITEMS
1. Select main menu item.
2. Once the meter shows the correct main menu item, press the £ SET button. The meter
shows either the active sub-menu item or the main menu item's current value.
3. If the meter shows an available sub-menu item, press the ¢ ADV button to show the
sub-menu item's current value.
The main menu items "
sub-menus. If you press the £ SET button when the meter shows either of these items,
Note
the meter will show the current number value.
4. Press the £ SET button to change the flashing number value. The left-most digit (above
the RECALL button) may be set to a minus sign. Also, press the £ SET button to
change the decimal point position.
5. Press the ¢ ADV button to change which digit is flashing.
18
S
ETTING
TARTED
OFFSET
" and "
COnFIG
" do not have