Saving Changes - Omega DPF700 User Manual

3.7 SAVING CHANGES

You may store (save) meter changes in the volatile and nonvolatile memory. Remember you
cannot store changes in the nonvolatile memory without first storing them in
the volatile memory.
To store changes in the nonvolatile memory, follow these steps:
1. Make required changes, using the ¢ ADV button to show current values and also
to move from left to right through the digital display. The digit or value that may be
changed will flash. Use the £ SET button to change the function, number value or
decimal point of the flashing item.
2. Press the MENU button until the meter shows "
3. Press the £ SET button. The meter shows "
4. Press the MENU button to store the changes to the nonvolatile memory. If power
loss occurs, or meter is hard reset these changes stay in the meter's memory.
To store changes in the volatile memory, follow these steps:
1. Make required changes, using the ¢ ADV button to show current values and also
to move from left to right through the digital display. The digit or value that may be
changed will flash. Use the £ SET button to change the function, number value or
decimal point of the flashing item.
2. Press the MENU button to store changes to the volatile memory.
3. Press the RESET button to operate the meter from the volatile memory.
G S
ETTING TARTED
noStor
StorE
".
3
".
19