Meter Configuration Detail - Omega DPF700 User Manual

6
R
SECTION 6. REFERENCE TABLES (Continued)
The 6 digits of Configuration show as a sub-menu of
0 0 0 0 0
Determines analog output signal.
0 4-20 mA
1 0-10V
0 Unlatched
1 Latched
0 Setpoint LO works as active below the setpoint
1 Setpoint LO works as active above the set-point
(similar to setpoint HI).
0 Message handshake - If RTS input is true,
sends complete message
1 Character handshake - Checks RTS input before sending each character, and
sends characters only while RTS is true.
0
1
30
T
EFERENCE
Table 6-3. Meter Configuration Detail
(Factory defaults are bold and in italics)
6 Digits of Configuration
0
Determines the communication rate.
9600 baud rate
1200 baud rate
0 Transmits alarm status (total of 9 characters)
1 Does not transmit alarm status character
ABLES
CONFIG
.