Checking The Brake Fluid Level - Yamaha MT 10 Owner's Manual

touches the brake disc, have a Yamaha
dealer replace the brake pads as a set.
Rear brake pads
1 1
1. Brake pad wear indicator groove
Each rear brake pad is provided with a
wear indicator groove, which allows
you to check the brake pad wear with-
out having to disassemble the brake.
To check the brake pad wear, check
the wear indicator groove. If a brake
pad has worn to the point that the wear
indicator groove almost appears, have
a Yamaha dealer replace the brake
pads as a set.
Periodic maintenance and adjustment

Checking the brake fluid level

Before riding, check that the brake fluid
is above the minimum level mark.
EAU48071
Check the brake fluid level with the top
of the reservoir level. Replenish the
brake fluid if necessary.
Front brake
LOWER
1
1. Minimum level mark
EAU22582 Rear brake
1. Minimum level mark
Improper maintenance can result in
loss of braking ability. Observe
these precautions:



8-23
1
Specified brake fluid:
DOT 4
WARNING
Insufficient brake fluid may al-
low air to enter the brake sys-
tem, reducing
performance.
Clean the filler cap before re-
moving. Use only DOT 4 brake
fluid from a sealed container.
Use only the specified brake flu-
id; otherwise, the rubber seals
1
2
3
4
5
6
7
EWA15991
8
9
10
braking
11
12