Handlebar Switches - Yamaha MT 10 Owner's Manual

Instrument and control functions
To lock the steering
1
1
2
3
4
5
1. Push.
2. Turn.
6
1. Turn the handlebars all the way to
the left.
7
2. With the key in the "OFF" position,
push the key in and turn it to
8
"LOCK".
3. Remove the key.
9
TIP
If the steering will not lock, try turning
the handlebars back to the right slightly.
10
11
12
To unlock the steering
2 1
1. Push.
2. Turn.
From the "LOCK" position, push the
key in and turn it to "OFF".
(Parking)
The hazard lights can be turned on, but
all other electrical systems are off. The
key can be removed.
The steering must be locked before the
key can be turned to "
NOTICE
Using the "
an extended length of time may
cause the battery to discharge.
2
EAU74220
".
ECA23640
" (parking) position for
5-3

Handlebar switches

Left
2
1
6
5
1. Select switch "SELECT"
2. Traction control system switch "TCS"
3. Cruise control switches
4. Horn switch " "
5. Turn signal switch " / "
6. Dimmer/Pass switch " /
EAU66051
3
4
/PASS"