Yamaha MT 10 Owner's Manual page 38

Instrument and control functions
To adjust the brightness of the displays
1
and tachometer
1. Turn the key to "OFF".
2 2. Push and hold the "CLOCK" but-
ton.
3. Turn the key to "ON", and then re-
3
lease the "CLOCK" button after
five seconds.
4
4. Push the "RESET" button to select
the desired brightness level.
5. Push the "CLOCK" button to con-
5
firm the selected brightness level.
The control mode changes to the
6
shift timing indicator light activity
function.
7
To set the shift timing indicator light ac-
tivity function
8
1. Push the "RESET" button to select
one of the following indicator light
9
activity settings:

On - the indicator light will come
10
on when activated. (This setting
is selected when the indicator
light stays on.)
11

Flash - the indicator light will
flash when activated. (This set-
12
ting is selected when the indica-
tor light flashes four times per
second.)

Off - the indicator light is deacti-
vated; in other words, it will not
come on or flash. (This setting
is selected when the indicator
light flashes once every two
seconds.)
2. Push the "CLOCK" button to con-
firm the selected indicator light ac-
tivity. The control mode changes to
the shift timing indicator light acti-
vation function.
To set the shift timing indicator light ac-
tivation function
TIP
The shift timing indicator light activation
function can be set between 7000 r/min
and 13000 r/min. The indicator light can
be set in increments of 200 r/min.
1. Push the "RESET" button to select
the desired engine speed for acti-
vating the indicator light.
2. Push the "CLOCK" button to con-
firm the selected engine speed.
The control mode changes to the
shift timing indicator light deactiva-
tion function.
5-15
To set the shift timing indicator light de-
activation function
TIP

The shift timing indicator light de-
activation function can be set be-
tween 7000 r/min and 13000 r/min.
The indicator light can be set in in-
crements of 200 r/min.

Be sure to set the deactivation
function to a higher engine speed
than for the activation function,
otherwise the shift timing indicator
light will remain deactivated.
1. Push the "RESET" button to select
the desired engine speed for deac-
tivating the indicator light.
2. Push the "CLOCK" button to con-
firm the selected engine speed.
The control mode changes to the
shift timing indicator light bright-
ness function.
To adjust the shift timing indicator light
brightness
1. Push the "RESET" button to select
the desired indicator light bright-
ness level.
2. Push the "CLOCK" button to con-