Table of Contents
Advertisement
Periodic maintenance and adjustment
1
NO.
ITEM
2
12
Drive chain
3
4
13 * Steering bearings
5
14 * Steering damper
15 * Chassis fasteners
6
Brake lever pivot
16
shaft
7
Brake pedal pivot
17
shaft
Clutch lever pivot
8
18
shaft
Shift pedal pivot
19
shaft
9
20
Sidestand
10
21 * Sidestand switch
11
22 * Front fork
12
Shock absorber
23 *
assembly
CHECK OR MAINTENANCE JOB
• Check chain slack, alignment and
condition.
• Adjust and lubricate chain with a
special O-ring chain lubricant
thoroughly.
• Check bearing assemblies for
looseness.
• Moderately repack with
lithium-soap-based grease.
• Check operation and for oil
leakage.
• Make sure that all nuts, bolts and
screws are properly tightened.
• Lubricate with silicone grease.
• Lubricate with lithium-soap-based
grease.
• Lubricate with lithium-soap-based
grease.
• Lubricate with lithium-soap-based
grease.
• Check operation.
• Lubricate with lithium-soap-based
grease.
• Check operation and replace if
necessary.
• Check operation and for oil
leakage.
• Replace if necessary.
• Check operation and for oil
leakage.
• Replace if necessary.
ODOMETER READING
1000 km
10000 km
20000 km
(600 mi)
(6000 mi)
(12000 mi)
Every 1000 km (600 mi) and after washing the motorcycle, riding in the rain or
riding in wet areas
8-6
ANNUAL
30000 km
40000 km
CHECK
(18000 mi)
(24000 mi)
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
