Seat; Adjusting The Front Fork - Yamaha MT 10 Owner's Manual

Seat

To remove the seat
1. Open the seat lock cover, insert
the key into the seat lock, and then
turn the key counterclockwise.
3
1
2
1. Seat lock
2. Seat lock cover
3. Unlock.
2. While holding the key in that posi-
tion, lift the rear of the seat up, and
then pull the seat off.
To install the seat
1. Insert the projections into the seat
holders as shown.
EAU57991
1
2
1. Projection
2. Seat holder
2. Push the rear of the seat down to
lock it in place.
3. Remove the key.
TIP
Make sure that the seat is properly se-
cured before riding.
Instrument and control functions

Adjusting the front fork

NOTICE

2

This model is equipped with adjustable
suspension. The spring preload, re-
bound damping force, and compres-
sion damping force of each leg can be
adjusted.
Always adjust both fork legs equal-
ly, otherwise poor handling and loss
of stability may result.
Spring preload
To increase the spring preload and
thereby harden the suspension, turn
the adjusting nut on each fork in direc-
tion (a). To decrease the spring preload
5-22
Use extra care to avoid scratch-
ing the gold-anodized finish
when making suspension ad-
justments.
To avoid damaging the suspen-
sion's internal mechanisms, do
not attempt to turn beyond the
maximum or minimum settings.
WARNING
EAU70410
1
ECA22471
2
3
4
5
6
7
8
EWA10181
9
10
11
12