Yamaha MT 10 Owner's Manual page 30

Instrument and control functions
or if the warning light remains on, have
1
a Yamaha dealer check the vehicle.
2
ABS warning light "
In normal operation, the ABS warning
3
light comes on when the key is turned
to "ON", and goes off after traveling at a
speed of 10 km/h (6 mi/h) or higher.
4
If the ABS warning light:

does not come on when the key is
5
turned to "ON"

comes on or flashes while riding
6

does not go off after traveling at a
speed of 10 km/h (6 mi/h) or higher
The ABS may not work correctly. If any
7
of the above occurs, have a Yamaha
dealer check the system as soon as
8
possible. (See page 5-18 for an expla-
nation of the ABS.)
9
WARNING
If the ABS warning light does not go
10
off after traveling at a speed of 10
km/h (6 mi/h) or higher, or if the
11
warning light comes on or flashes
while riding, the brake system re-
12
verts to conventional braking. If ei-
ther of the above occurs, or if the
warning light does not come on at
all, use extra caution to avoid possi-
ble wheel lock during emergency
braking. Have a Yamaha dealer
EAU69890
"
ABS
check the brake system and electri-
cal circuits as soon as possible.
Traction control system indicator
light "
In normal operation, this indicator light
flashes when traction control has en-
gaged.
If the traction control system (page 4-4)
becomes disabled while riding, this in-
dicator light and the engine trouble
warning light will come on.
The electrical circuit of this indicator
light can be checked by turning the key
to "ON". The light should come on for a
EWA16041
few seconds, and then go off.
If the light does not come on initially
when the key is turned to "ON", or if the
light remains on, have a Yamaha deal-
er check the electrical circuit.
Steering damper warning light "
This warning light comes on if a prob-
EAU74080
"
EAU74100
5-7
lem is detected in the steering damper.
If this occurs, have a Yamaha dealer
check the vehicle.
The electrical circuit of the warning light
can be checked by turning the key to
"ON". The warning light should come
on for a few seconds, and then go off.
If the warning light does not come on
initially when the key is turned to "ON",
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
Shift timing indicator light
This indicator light can be set to come
on and go off at the desired engine
speeds and is used to inform the rider
when it is time to shift to the next higher
gear. (See page 5-14.)
The electrical circuit of the indicator
light can be checked by turning the key
to ON. The indicator light should come
on for a few seconds, and then go off.
If the indicator light does not come on
initially when the key is turned to ON, or
if the indicator light remains on, have a
Yamaha dealer check the electrical cir-
"
cuit.
EAU74090