Yamaha MT 10 Owner's Manual page 22

Hide thumbs Also See for MT 10:
Table of Contents

Advertisement

Special features
1
2
3
4
1
1. Engine trouble warning light "
5
2. Traction control system indicator light
"
"
6
The "
" indicator light flashes when
traction control has engaged. You may
7
notice slight changes in engine and ex-
haust sounds when the system has en-
gaged.
8
In certain conditions, the traction con-
trol system may be automatically dis-
9
abled. Should this happen, both the
"
" indicator light and the "
10
ing light will come on.
The TCS display (page 5-12) indicates
the current TCS setting. There are four
11
settings.
12
TCS "OFF"
TCS "OFF" turns the traction control
system off.
TCS "1"
TCS "1" minimizes traction control sys-
tem assist. Select this mode for sporty
riding.
TCS "2"
TCS "2" provides a moderate level of
2
traction control assist. Select this mode
"
for standard street riding.
TCS "3"
TCS "3" maximizes traction control as-
sist; wheel spin is most strongly con-
trolled. Select this mode for rain,
slippery road conditions, and whenever
maximum traction control is desirable.
TIP
Traction control can be turned on
or off only when the vehicle is
" warn-
stopped.
When the key is turned to "ON",
traction control is turned on and
set to TCS "1", "2" or "3" (whichev-
er was last selected).
Turn the traction control system off
to help free the rear wheel if the ve-
NOTICE
Use only the specified tires. (See
page 8-18.) Using different sized
tires will prevent the traction control
system from controlling tire rotation
accurately.
Resetting the traction control sys-
tem
The traction control system will auto-
matically disable when:
If the traction control system is dis-
abled, both the "
the "
Should this occur, try resetting the sys-
tem as follows.
1. Stop the vehicle and turn the key
4-5
hicle gets stuck in mud, sand, or
other soft surfaces.
the front wheel or rear wheel
comes off the ground while riding.
excessive rear wheel spin is de-
tected while riding.
either wheel is rotated with the key
turned to "ON" (such as when per-
forming maintenance).
" indicator light and
" warning light will come on.
to "OFF".
ECA16801

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mtn1000g

Table of Contents