Preparing For Service; Safety Requirements - Sun Microsystems StorEdge 6320 System 1.0 Reference And Service Manual

7
C H A P T E R

Preparing for Service

The Sun StorEdge 6320 system is preconfigured with all the FRUs installed as
specified by the customer. This chapter describes the preparation required to service
the FRUs in the system.
This chapter is organized as follows:
"Safety Requirements" on page 7-1
"Removing and Replacing the Front Door" on page 7-2
"Removing and Replacing a Side Panel" on page 7-2
The tools and parts required are described in each FRU chapter.
7.1

Safety Requirements

Ensure that the voltage and frequency of the power outlet to be used match the
electrical rating labels on the system.
Wear an antistatic wrist strap when handling any magnetic storage FRUs or
system boards.
Use only properly grounded power outlets.
Caution – You must read the Sun StorEdge 6320 System Regulatory and Safety
Compliance Manual before beginning any procedure in this manual.
Caution – Do not make mechanical or electrical modifications to the system.
Sun Microsystems is not responsible for regulatory compliance of modified cabinets.
7-1