Table of Contents
Advertisement
All software features are available through the UI and CLI; you can use either
interface to manage your storage.
The sscs command provides volume and Storage Service Processor management
for the Sun StorEdge 6020 arrays and Sun StorEdge 6300 systems. The sscs
command enables you to manage volumes, storage pools, volume groups, initiator
groups, storage trays, and the Storage Service Processor.
2.2.5
Storage Automated Diagnostic Environment 2.2
The Storage Automated Diagnostic Environment is a distributed online health and
diagnostic monitoring tool used on the Sun StorEdge 6320 system. It can be
configured to monitor on a 24-hour basis, collecting information that enhances the
reliability, availability, and serviceability (RAS) of the storage devices.
The Storage Automated Diagnostic Environment offers the following features:
A common web-based user interface for device monitoring and diagnostics
Distributed test invocation by means of lists or topology. You can run the tests
through the Storage Automated Diagnostic Environment GUI or through the
command-line interface (CLI).
Topology grouping for multi-level hosts and components
Revision updates
Support for the Storage Service Processor and components of Sun StorEdge 6320
system
Remote notification through Sun StorEdge Remote Response
Role-based access
Service utilities
Encryption through a Secure Socket Layer (SSL) protocol to protect transmitted
information.
2.2.5.1
Diagnostic Functionality
Diagnostic tests have been integrated into the Storage Automated Diagnostic
Environment for device diagnostics and FRU isolation. Each test can be run
individually from the command line or from the Storage Automated Diagnostic
Environment user interface.
The Storage Automated Diagnostic Environment Diagnostic tests are described in
the Storage Automated Diagnostics Environment 2.2 System Edition User's Guide.
Chapter 2 Hardware and Software Descriptions
2-7
Advertisement
Chapters
Table of Contents
