Interval Set Mode; Duration Set Mode; Volume Mode; Dmx Mode - ProLights Pendant stations User Manual

8

2.3 INTERVAL SET MODE

When the unit is under "READY TO HAZE" state, press the FUNCTION button once, the LCD screen shows
INTERVAL SET. Use UP/DOWN button to adjust the interval of timer, which can be set from 1 to 200 seconds

2.4 DURATION SET MODE

When the unit is under "READY TO HAZE" state, press the FUNCTION button twice, the LCD screen shows
DURATION SET. Use UP/DOWN button to adjust the duration of timer, which can be set from 1 to 200
second

2.5 VOLUME MODE

When switching the GHOST GH500H, the characters, "READY TO HAZE", will be displayed on the LCD
screen. Pressing VOLUME button once can activate the hazer and the LCD screen will display "WORKING".
Press the VOLUME button again will cease hazing and the LCD screen will display "READY TO HAZE". Under
"READY TO HAZE" mode, to keep pressing MANUAL button can make the hazer produce haze(LCD screen
shows "WORKING") while releasing MANUAL button will stop hazing(LCD screen shows "READY TO HAZE").
Finally, under this mode, press TIMER button, the timer will be triggered.

2.6 DMX MODE

When the unit is under "READY TO HAZE" state, press the FUNCTION button three times, the LCD screen
shows DMX 512. Use UP/DOWN button to adjust the DMX address, which can be set from 1 to 512. The
GH500H use 1 channel to control volume output operation.

2.7 CONNECTION OF THE DMX LINE

DMX connection employs standard XLR connectors. Use shielded pair-twisted cables with 120Ω imped-
ance and low capacity.
The following diagram shows the connection mode:
DMX - INPUT
XLR plug
GHOST GH500H
CH Function in 1 channel mode
VOLUME SMOKE OUTPUT
1 Off
On
Pin1 : GND - Shield
Pin2 : - Negative
Pin3 : + Positive
Pin4 : N/C
Pin5 : N/C
Fig.4
Value
000 - 249
250 - 255
DMX - OUTPUT
XLR socket