General Instructions; Warnings And Installation Precautions - ProLights Pendant stations User Manual

2
WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information about
the installation, usage and maintenance of the unit.
SAFETY
General instruction
• The products referred to in this manual conform to the European Community Directives and are there-
fore marked with .
• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.
Never make any modifications on the unit not described in this instruction manual, otherwise you will
risk an electric shock.
• Connection must be made to a power supply system fitted with efficient earthing (Class I appliance ac-
cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units
from indirect contact and/or shorting to earth by using appropriately sized residual current devices.
• The connection to the main network of electric distribution must be carried out by a qualified electrical
installer. Check that the main frequency and voltage correspond to those for which the unit is designed
as given on the electrical data label.
• This unit is not for home use, only professional applications.
• Never use the fixture under the following conditions:
- in places subject to vibrations or bumps;
- in places with a temperature of over 45°C or less than 2°C.
• Make certain that no inflammable liquids, water or metal objects enter the fixture.
• Do not dismantle or modify the fixture.
• All work must always be carried out by qualified technical personnel. Contact the nearest sales point for
an inspection or contact the manufacturer directly.
• If the unit is to be put out of operation definitively, take it to a local recycling
plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• Remove all the packaging material. Make sure that there are no packaging remnants near the fog out-
put nozzle.
• Install the unit in a well ventilated place to avoid overheating. Avoid blocking air intakes and outputs.
Keep a minimum distance of 20 cm to any other objects.
• Disconnect from electric mains power supply when not in use, when filling the haze fluid tank, or when
changing a fuse. Keep unit dry.
• If moisture or liquids enter the hazer machine case, immediately disconnect power supply. Contact a
service technician to determine safety for use.
• Keep machine in flat position, never put it in tilted place.
• Never put any flammable material into the tank, read the user manual thoroughly before operation.
• Better use our oil-fluid Prolights, random use with other fluid may jam the pipe, or even erode the
components inside.
• Keep sufficient haze fluid in tank. Operating the unit without sufficient haze fluid, the compressor will
stop working.
• If any abnormal running occurs, stop it immediately, empty the fluid, and bring the done up unit to
dealer for servicing. Make sure all fluid is empty from the tank before moving or shipping.
• Never drink haze fluid. If ingested, call a doctor immediately. If fluid contacts eyes or skin, rinse skin
thoroughly with water.
GHOST GH500H