Data Logger; Breaker Maintenance - GE T35 Instruction Manual

6 ACTUAL VALUES
!"
PATH: ACTUAL VALUES RECORDS

# DATA LOGGER

#
MESSAGE
The is the time at which the oldest available samples were taken. It will be static until the log gets full,
OLDEST SAMPLE TIME
at which time it will start counting at the defined sampling rate. The
ples were taken. It counts up at the defined sampling rate. If Data Logger channels are defined, then both values are static.
Refer to the !"
COMMANDS CLEAR RECORDS
!"
PATH: ACTUAL VALUES RECORDS
# BREAKER 1
#
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
There is an identical menu for each of the breakers. The
!"
COMMANDS CLEAR RECORDS
defined as the slowest operating time of breaker poles that were initiated to open.
GE Multilin
!"
DATA LOGGER
OLDEST SAMPLE TIME:
2000/01/14 13:45:51
NEWEST SAMPLE TIME:
2000/01/14 15:21:19
menu for clearing data logger records.
!" !
MAINTENANCE BREAKER 1(6)
BKR 1 ARCING AMP φA:
0.00 kA2-cyc
BKR 1 ARCING AMP φB:
0.00 kA2-cyc
BKR 1 ARCING AMP φC:
0.00 kA2-cyc
BKR 1 OPERATING TIME
φA:
0 ms
BKR 1 OPERATING TIME
φB:
0 ms
BKR 1 OPERATING TIME
φC:
0 ms
BKR 1 OPERATING
TIME: 0 ms
BKR 1 ARCING AMP
menu for clearing breaker arcing current records. The
T35 Transformer Management Relay
is the time the most recent sam-
NEWEST SAMPLE TIME

6.4.5 BREAKER MAINTENANCE

values are in units of kA
BREAKER OPERATING TIME
6.4 RECORDS
6.4.4 DATA LOGGER
6
2
-cycles. Refer to the
is
6-17