DETEWE OpenPhone 61 User Manual page 62

number after the external line
seizure code digit (the preset-
ting is
In the case of internal telephone
■
numbers, you enter the number
directly if external line seizure is
manual, and prefaced with the
star key twice
external line seizure is auto-
matic.
Activate the function with On.
3 DivertƒMSN: Select the MSN you
want to forward from the list of
MNSs (the telephone numbers on a
multi-terminal access). Choose
Immediately, After delay or
Busy for the forwarding mode. Then
enter the external destination
(Dest.:).
Note: For this type of forwarding,
the (external) destination number is
always entered without the external
line seizure code digit.
Activate the function with on.
Active call forwarding (Immedi-
ately, After delay, Busy) is marked
in the drop-down list of MSNs with a
"+" in front of the telephone
number. You use the plus/minus key
off.
4ƒDivert door: This type of for-
warding diverts all calls signalled
from the door. You enter the tele-
58
Main Menu
).
to switch this call forwarding
phone number under Dest.: (des-
tination) as follows:
In the case of external tele-
■
phone numbers, you enter the
number directly if external line
seizure is automatic; if, on the
other hand, external line seizure
if is manual, enter the number af-
ter the external line seizure code
digit (the presetting is
In the case of internal telephone
■
numbers, you enter the number
directly if external line seizure is
manual, if external line seizure is
automatic, on the other hand,
you enter the number after
pressing the star key twice
Activate the function with on, and
deactivate the diversion with off.
This diversion applies to the entire
system. It overwrites any diversion
applying until then and is itself over-
written by any new diversion subse-
quently activated from another tele-
phone.
5ƒFollowƒme: This type of call for-
warding is configured on a destina-
tion terminal to which calls for an
original (source) terminal are for-
warded. The terminal PIN of the
source telephone is required for this
function (see page 62). On the desti-
nation terminal, select 3 Follow me
from the "Call forwarding"
MenuCard. As the Source, enter the
.
Features and MenuCards
).